⚠️ Error Codes
List of error codes that can be found on HARMON-E
- Reducing cluster limit by …A
- Charger changed into error state
- Cannot run Unbalanced Load Prevention
- Unbalanced load control not active anymore
- Can’t calculate building consumption because OCPP values is missing
- Can’t calculate building consumption because power meter values are missing
- Limit set by Distribution Network Operator (DNO)
- Chargepoint didn’t receive OCPP values for 60 seconds
- Chargepoint received invalid feedback
- Charge point reported higher OCPP values than the load management has allocated
- Unexpected Error - ETIMEDOUT
- Unexpected Error - ECONNREFUSED
- Unexpected Error - EHOSTUNREACH
- Authentication error on backend connection, check settings for <CP_ID>
- Connection closed from <CP_ID> to backend with code 1012
- Connection closed for <CP_ID>
- Unable to set chargingProfile