How to configure an Alpitronic Hypercharger for OCPP-based Load Management

Step 1: Open the HyperCharger Configuration

Step 2: Deactivate Modbus server

Step 3: Configure OCPP

Step 4: Change the OCPP configuration keys

Step 5: Deactivate kiosk mode (if the active charging station is not sending OCPP traffic)

Step 6: Reboot the Hypercharger to apply the settings

Done

Continue the configuration in HARMON-E

Don't forget to activate the correct meter values and set the appropriate reporting interval through your CPMS / CPO backend 

https://support.flexecharge.com/hc/en-dk/articles/14629845230108-Prerequisites-for-any-charger-on-HARMON-E