Keba

Prepare the Keba charging stations by following these actions:

• Turn off the proprietary load management
• Keba Firmware P30x_SW_1_18 (1.18.0) on 10/14/2024 and older only accepts Absolute Charging Profiles.

Change Schedule Kind

In the charging station's Advanced configuration, change the Schedule Kind to Absolute.

Rejected ChargingProfiles

Trigger

If charging profiles are repeatedly rejected by a charger, it might be caused by too many charging profiles being sent to the charger during commissioning and acceptance testing

Remedy

Sent a ClearChargingProfile command from your CPMS. Charging profiles should be accepted again after that.