Error State Reduction (Fail-Safe)

The error state reduction is triggered by a chargerr going into an error state. Find out here what causes this: Charger changed into error state

Default behavior for disconnected chargers

When a charger loses connection, the load manager assumes that the charger operates at its rated current. To prevent overload, the load manager reduces the charging limit by the rated current.

Example

If a station is configured at 434 A, the load manager subtracts 434 A from the cluster’s total charging currents.

Changing the Default Setting

You can turn off the Error State Reduction in the Configuration of the load management.

Changing the default should only be done by experts as it increases the risk of overload and damage to your electrical equipment, if not done correctly!